Skip navigation

This Question is Possibly Answered

1 "correct" answer available (4 pts) 4 "helpful" answers available (2 pts)
29,621 Views 5 Replies Last post: Apr 29, 2010 11:49 AM by NOA_TECH_CLAUDE
RSS
DENAAAA 2 posts since
Apr 22, 2010
Currently Being Moderated

Apr 22, 2010 9:12 PM

can't connect using "search for access point"

It always says that "The access point's security settings are not supported by the nintendo ds".

What do I have to do to fix this ?

I am using the Linksys WRT54G.

& I also can't connect to 192.168.1.1

It says

  • The site could be temporarily unavailable or too busy. Try again in a few

    moments.

 

  • If you are unable to load any pages, check your computer's network

    connection.

 

  • If your computer or network is protected by a firewall or proxy, make sure

    that Firefox is permitted to access the Web.

_TANIS_ 1,730 posts since
Apr 24, 2010
Currently Being Moderated
Apr 24, 2010 8:31 AM in response to: DENAAAA
Re: can't connect using "search for access point"

What sort of security are you using on your router?

 

Some types, such as WPA are not supported.

 

The easiest solution if you are using WPA encryption would be to switch to another security mode, such as WEP.

DARKRIA_LV2 27 posts since
Apr 22, 2010
Currently Being Moderated
Apr 25, 2010 1:14 PM in response to: DENAAAA
Re: can't connect using "search for access point"

DENAAAA, try typing this on your browser (192.168.1.2) and see if it works.

KLAIMORE111 6 posts since
Apr 16, 2010
Currently Being Moderated
Apr 29, 2010 11:28 AM in response to: DENAAAA
Re: can't connect using "search for access point"

Find your IP address. Easily done by googling Find ip address.  go http://(PUT IP ADDRESS HERE) on Web browser.

Know your user and pass: normally admin and admin, admin and password or admin and blank in password.

Go to wireless and change it to WEP 64bit or 128bit.

194 posts since
Apr 1, 2010
Currently Being Moderated
Apr 29, 2010 11:49 AM in response to: DENAAAA
Re: can't connect using "search for access point"

The following link will provide more information about router's default settings, and how to find and change your router's security settings.

http://www.nintendo.com/consumer/wfc/en_na/routers/Linksys/WRT54G.jsp

 

 

It appears that you have tried the default login information, please use the information below to determine how to login to your router's settings.  Please note that it will be vary depending on whether you are using Windows or a Mac.

 

Windows Users:

  1. Hold down the Windows button, and press "R".
  2. The run command prompt box will appear. In this window, type in "CMD" and hit enter.
  3. On this black screen (command prompt), type "ipconfig/all" and hit enter.
  4. Use the "Default Gateway" information to login to your router settings.


Mac Users:

  1. Access your System Preferences.
  2. Select Internet and Network.
  3. Then click the Network icon (small globe).  The following screen should appear:
  4. Use the 'Router" information to login to your router settings.

More Like This

  • Retrieving data ...

Bookmarked By (0)